Difference between revisions of "PSX MODE"
(→Tips & Tricks) |
|||
| Line 1: | Line 1: | ||
| + | *The Multi Optical Disc Emulator (MODE) is an all-in-one device that allows users to experience the full range of Sony's Playstation software. It simulates all aspects of the CD hardware. | ||
| − | + | Firmware can be downloaded [https://terraonion.com/en/support/ here] (Current Firmware is [[SSDS3_firmware|1.04 R02]]) Please note that you need to register your device and if firmware is not present after registering it means you are on the most current firmware already. | |
| − | + | Manual is located [https://downloads.terraonion.com/mode_manual.pdf here] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | Manual is located [https://terraonion.com/ | ||
Revision as of 17:08, 4 February 2021
- The Multi Optical Disc Emulator (MODE) is an all-in-one device that allows users to experience the full range of Sony's Playstation software. It simulates all aspects of the CD hardware.
Firmware can be downloaded here (Current Firmware is 1.04 R02) Please note that you need to register your device and if firmware is not present after registering it means you are on the most current firmware already.
Manual is located here
Set-Up
- Any storage size MicroSD card should work as long as it is FAT32 or ExFAT formatted. TerraOnion generally recommends avoiding Samsung branded cards as they have been known to cause issues on their devices. Sandisk is the preferred manufacturer.
- HDD/SSD must be 7mm height or thinner.
- HDD/SSD 2TB or below should be formatted as exFAT with default allocation, MBR, and set as the primary partition. Multiple partitions are not supported.
- HDD/SSD >2TB should be formatted as exFAT with default allocation, GPT, and set as the primary partition. Multiple partitions are not supported.
- CD games must be in their own folders. The folder name dictates the name that is displayed in the SSDS3 menu for CD games. Nested folders are fully supported for both CD and Hu card games.
- REQUIRES soldering a QSB (Quick Solder Board) to the mainboard of the PSX. Also requires lifting pins on the CD Controller chip.
Usage
- There is no reset function on the SSDS3 and while there is a hot-key (In Game Trigger) to accomplish this it is not compatible with a sizeable portion of the library. As such you will need to power on and off your system to return to menu
- You can assign a bios in the SSDS3 options menu. For the greatest compatibility TerraOnion recommends using either the US or JP 3.0 bios.
- Turning Arcade Card emulation on in the options should be considered a default. It will turn off automatically behind the scene for games that do not need it.
- Seek time emulation allows games to run at a simulation of the speed of an actual disc. If you have problems with a particular game try toggling it on and off. In most instances leaving it on works best. Also let the TerraOnion team know of your findings.
Game Compatibility & Known Issues
- PSX MODE is only compatible with PU-18 motherboards. Most commonly found in SCPH-550X models.
- There is currently no in game reset available. This is a PSX limitation.
Tips & Tricks
- To reach the bios menu, open the lid and power on the console. Alternatively open the lid when a game is loaded and press reset.
